This article will show how to convert voltage measurement units from nanovolts (nV) to megavolts (MV). We will cover essential definitions, provide examples, share relevant formulas, and present tables, along with answers to common questions.
Definitions of Volt, Nanovolt, and Megavolt
Let’s get started by understanding the key definitions of Volt (V)
, Nanovolt (nV)
, and Megavolt (MV)
. Understanding these terms will allow you to perform conversions confidently.
What is Volt (V)?
A volt (V
) is the SI (International System of Units) unit of electric potential and voltage. It measures the difference in electric energy between two points in a circuit. One volt means one ampere of current uses one watt of power.[1]
According to SI prefixes[2], which are based on powers of 10, a volt (1 V
) is equivalent to one billion nanovolts, or 109 nV
, or 1,000,000,000 nV
.

What is Nanovolt (nV)?
A nanovolt (nV) is a unit of electrical potential equal to one-billionth (1/1,000,000,000
) of a volt (10-9 V
). It is primarily used in high-precision electrical measurements, such as scientific instrumentation, quantum electronics, and sensitive signal detection, where extremely small voltage variations must be accurately captured and analyzed.

Its ultra-small scale makes it essential for applications requiring minimal interference and precise voltage control.
What is Megavolt (MV)?
A megavolt (MV) is a unit of electrical potential equal to one million volts (1,000,000 V
). Think of it like comparing the height of a building to a mountain. Megavolts help quantify extremely high voltages where standard volt measurements are impractical.

nV to MV formula
Let’s take a closer look at the conversion formula so you can carry out these conversions independently, whether using a calculator or doing it manually with pencil and paper.
The nano-
prefix in the International System of Units (SI) represents a multiplier of 10-9 (0.000000001)
while the mega-
represents a multiplier of 106 (1,000,000)
.
So, to convert from nanovolts to megavolts, divide the number of nanovolts (V(nV)
) by 1015
or 1,000,000,000,000,000
.
V(MV) = V(nV) ÷ 1015 = V(nV) ÷ 1,000,000,000,000,000
Or remember the nV-to-MV
conversion factor: 1 nV = 10-15 = 0.000000000000001 MV
nV to MV conversion table
The conversion table below provides a handy reference for converting voltage measurement units from nanovolts (nV) to megavolts (MV). It covers a range from 0.1 nV to 1,000 nV, allowing for easy and quick conversions between both units of measurement.
Nanovolts (nV) | Megavolts (MV) |
---|---|
0.1 nV | 0.0000000000000001 MV |
0.5 nV | 0.0000000000000005 MV |
1 nV | 0.000000000000001 MV |
2 nV | 0.000000000000002 MV |
4 nV | 0.000000000000004 MV |
5 nV | 0.000000000000005 MV |
10 nV | 0.00000000000001 MV |
20 nV | 0.00000000000002 MV |
30 nV | 0.00000000000003 MV |
40 nV | 0.00000000000004 MV |
50 nV | 0.00000000000005 MV |
60 nV | 0.00000000000006 MV |
70 nV | 0.00000000000007 MV |
80 nV | 0.00000000000008 MV |
90 nV | 0.00000000000009 MV |
100 nV | 0.0000000000001 MV |
200 nV | 0.0000000000002 MV |
500 nV | 0.0000000000005 MV |
800 nV | 0.0000000000008 MV |
1,000 nV | 0.000000000001 MV |
Examples
Now, let's look at an example that illustrates the calculations required to convert from nanovolts to megavolts (nV to MV).
Example: Industrial Transformer Testing
A factory uses sensitive voltage sensors to monitor small changes in high-voltage transformers. These sensors can detect very low voltage readings in nanovolts.
One transformer generates a reading of 6,300,000,000,000,000 (6.3 × 1015) nanovolts
. This reading needs to be converted to megavolts to ensure the transformer maintains a consistent high-voltage supply for industrial operations.
Solution
Since 1 megavolts (MV) = 1015 = 1,000,000,000,000,000 nanovolts (nV)
, we can convert 6,300,000,000,000,000 (6.3 × 1015) nV
to megavolts by using the following formula:
Therefore, the 6,300,000,000,000,000 nV
output voltage of the transformer is equivalent to 6.3 MV
.
To solve the problem with our calculator, follow the steps below:
- Enter the value in nanovolts – For this example, enter
6,300,000,000,000,000
into theFrom
box. - View the result – The converter instantly calculates and displays the equivalent value in megavolts:
6.3 MV
.

FAQs
Is 1 nanovolt or 1 megavolt larger?
A megavolt (MV) is a quadrillion times bigger than a nanovolt (nV). Here are the relationships between the units:
1 MV = 1015 = 1,000,000,000,000,000 nV
1 nV = 10-15 = 1 ÷ 1,000,000,000,000,000 = 0.000000000000001 MV
How to convert from nanovolts to megavolts?
To convert voltage from nanovolts (nV) to megavolts (MV), follow these simple steps:
- Write down the voltage value in
nanovolts (nV)
. - Multiply it by the value of the
nV-to-MV
conversion factor:10-15
or0.000000000000001
. - The result of the multiplication is the value of the voltage in
megavolts (MV)
.
Why do I need to convert from nanovolts to megavolts?
Nanovolts (nV) represent extremely small voltage values, while megavolts (MV) are used in high-energy applications such as power grid systems, particle accelerators, and industrial testing. Converting from nanovolts to megavolts ensures compatibility with large-scale voltage operations where precise measurements are necessary for efficiency and safety.
This conversion simplifies calculations, improves readability, and allows for better analysis of high-voltage phenomena. Whether studying electrical surges, designing advanced power systems, or researching extreme voltage effects, using megavolts instead of nanovolts makes voltage data more practical and actionable.
You now know how to convert voltage from nanovolts (nV) to megavolts (MV). You can quickly use our calculator to convert between the voltage measurement units to save time for future calculations.